'Eze-Wall Brick Faced Dwarf Wall System'
The Eze-Builder thin-brick dwarf wall system consists of a lightweight thin-brick cladding locked into a strong and durable patented galvanised steel panel.
These steel panels are then fixed to a galvanised steel frame which bolts directly onto the steel base and, once assembled, provides a strength greater than the frames of a full height conservatory.
The frame, 140cm thick is filled with a insulation quilt which provides a high thermal value which will reduce heat in the summer and retain heat in the winter in your conservatory.
The frame of the conservatory dwarf wall also provides the means of concealing electric cables and plumbing which can be routed through the frames.
The internal board finish of the dwarf wall for your conservatory can be whatever you wish, or a set of profiled panels can be supplied with matching brickwork.
'Eze-Wall Example'
 This picture of a nearly completed conservatory with the Eze-Wall Brick Faced Dwarf wall shows a steel base and wall system with some tiles omitted in order that the steel panel can be seen at the left end of the wall.
A range of different tiles are offered with this system so your conservatory can match the bricks on your home. For further information or to order please phone or email and we will be delighted to help.
Eze-Wall Dwarf Wall Specifications'
- EZE-Clad panel: 0.7mm galvanised steel profiled panel to Z275 standard
- Steel Frame: 1.2mm galvanised C section steel frame 140mm wide
- Breather membrane and moisture barrier - pass BS4016 part 3
- 10mm substrate board - rot and vermin proof
- 10 year warranty on all components subject to terms and conditions
'U values of insulated wall'
- Based upon internal finish of 15mm plasterboard
- With 50mm insulation = 0.36 W/m²K
- With 75mm insulation = 0.31 W/m²K
- With 100m insulation = 0.28 W/m²K
'Why Use Our EZE- Dwarf Wall System?'
| 